|
|
VN5050JTR-E
Category: Current Limit Switches, Electromechanical, Gate Drivers, Motor DriversSTMicroelectronics |
STMicroelectronics | The VN5050J-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open load condition both in on and off state, when STAT_DIS is left open or driven low. Output shorted to VCC is detected in the off state.When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention.Thermal shutdown with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
Packaging: TR
Supplier Type: Partner Stock | 2,500
in stock | | | Qty | Price |
|---|
| 2,500 | 1.5718 | | 5,000 | 1.5394 | | 10,000 | 1.507 |
|
Add to cart
This product is already in your quote request list.
|
|
|
HIP4082IBZT
Category: Gate Drivers, No CategoryRenesas Electronics |
Renesas Electronics | The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. It has a flexible input protocol for= driving every possible switch combination except those which would cause a shoot-through condition. The HIP4082’s reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5 µs) making it ideal for switching frequencies up to 200kHz. The HIP4082 does not contain an internal charge pump, but does incorporate non-latching level-shift translation control of the upper drive circuits.
Packaging: TAP
Supplier Type: Partner Stock | 1,515
in stock | | | Qty | Price |
|---|
| 1 | 5.5304 | | 10 | 4.9724 | | 25 | 4.7616 | | 50 | 4.5384 | | 100 | 4.3276 |
|
Add to cart
This product is already in your quote request list.
|
|
|
IR2104STRPBF
Category: Gate and Power Drivers, Gate Drivers, Mosfet Igbt DriversInfineon |
Infineon | The IR2104(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates from 10 to 600 volts.
Packaging: TAP
Supplier Type: Partner Stock | 1,983
in stock | | | Qty | Price |
|---|
| 1 | 2.6164 | | 10 | 2.356 | | 25 | 2.232 | | 50 | 2.0584 | | 100 | 1.8972 |
|
Add to cart
This product is already in your quote request list.
|
