|
|
AR0132AT6C00XPEA0-DRBR
Category: Electromechanical, Image Sensorsonsemi |
onsemi | ON Semiconductor's AR0132AT 1/3-inch CMOS digital image sensor with an active-pixel array of 1280H x 960V. It captures images in either linear or high dynamic range modes, with a rolling-shutter readout. It includes sophisticated camera functions such as auto exposure control, windowing, and both video and single frame modes. It is designed for both low light and high dynamic range scene performance. It is programmable through a simple two-wire serial interface. The AR0132AT produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including surveillance and HD video. This sensor is compatible with ON Semiconductor's automotive image co-processors which provides megapixel HDR image processing.
Packaging: TRY
Supplier Type: Authorized Distributor | 35,527
available | | | Qty | Price |
|---|
| 40 | 23.0134 | | 50 | 22.3914 | | 90 | 21.7694 | | 200 | 21.1475 | | 400 | 20.5255 | | 2,000 | 19.9035 | | 4,000 | 19.2815 |
|
Add to cart
This product is already in your quote request list.
|
|
|
MCP9700T-E/TT
Category: Electromechanical, Temperature, Temperature and Humidity Sensors, Temperature SensorsMicrochip |
Microchip | The MCP9700 sensors with Linear Active Thermistor™ Integrated Circuit (IC) comprise a family of analog temperature sensors that convert temperature to analog voltage.The low-cost, low-power sensors feature an accuracy of ±4°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors, e.g., thermistors, the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The Voltage Output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700 temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively. The MCP9700 output 0.1°C/bit for a 12- bit ADC with 4.096V reference.The MCP9700 provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides printed circuit board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for the stability of sensor output.
Packaging: TAP
Supplier Type: Authorized Distributor | 5,439
available | | | Qty | Price |
|---|
| 1 | 0.3794 | | 25 | 0.3546 | | 50 | 0.3286 |
|
Add to cart
This product is already in your quote request list.
|
|
|
BTS4140N
Category: Current Limit Switches, ElectromechanicalInfineon Technologies |
Infineon Technologies | Current Limit SW 1-IN 1-OUT 4.9V to 60V 0.2A Automotive AEC-Q100 4-Pin(3+Tab) SOT-223 T/R
Packaging: N/A
Supplier Type: Authorized Distributor | 3,856
available | | | Qty | Price |
|---|
| 79 | 1.3502 | | 100 | 1.2898 | | 250 | 1.2381 | | 500 | 1.1934 | | 1,000 | 1.1544 | | 2,500 | 1.1203 |
|
Add to cart
This product is already in your quote request list.
|
