Interface ICs

Showing 21–40 of 153 results

Select Product Manufacturer Description Availability Datasheet Web Price Quantity
DS90UB949TRGCTQ1

DS90UB949TRGCTQ1

Category: Integrated CircuitsInterface ICsLVDS Driver/ReceiverTexas Instruments
Texas Instruments LVDS Serializer 3360Mbps 1.2V Automotive AEC-Q100 64-Pin VQFN EP T/R

Packaging: N/A
Supplier Type: Authorized Distributor
2,000
available
QtyPrice
25024.11654
50023.54366

Add to cart

TUSB212IRWBR

TUSB212IRWBR

Category: Integrated CircuitsInterface ICsUSB Interface ICTexas Instruments
Texas Instruments Full Speed USB 2.0 High Speed Signal Conditioner USB 2.0 3.3V T/R 12-Pin X2QFN

Packaging: N/A
Supplier Type: Authorized Distributor
3,000
available
QtyPrice
3,0003.11262

Add to cart

PCA9557PWR

PCA9557PWR

Category: GPIO Expander, Integrated CircuitsInterface ICsTexas Instruments
Texas Instruments I2C/SMBus Interface 100kHz/400kHz 5.5V 16-Pin TSSOP T/R

Packaging: N/A
Supplier Type: Authorized Distributor
1,891
available
QtyPrice
12.57656
102.1763
252.14956
1001.8179
2501.69498
5001.46776
1,0001.1263

Add to cart

PCA9557PW,118

PCA9557PW,118

Category: GPIO Expander, Integrated CircuitsInterface ICsNXP
NXP I2C/SMBus Interface 100kHz/400kHz 5.5V 16-Pin TSSOP T/R

Packaging: N/A
Supplier Type: Authorized Distributor
137
available
QtyPrice
11.86018
101.70394
251.66138
1001.21954

Add to cart

PCA9557PW118

PCA9557PW118

Category: I/O Expander, Integrated CircuitsInterface ICsNXP
NXP The PCA9557 is a silicon CMOS circuit which provides parallel input/output expansion for SMBus and I²C-bus applications. The PCA9557 consists of an 8-bit input port register, 8-bit output port register, and an I²C-bus/SMBus interface. It has low current consumption and a high-impedance open-drain output pin, IO0. The system master can enable the PCA9557's I/O as either input or output by writing to the configuration register. The system master can also invert the PCA9557 inputs by writing to the active HIGH polarity inversion register. Finally, the system master can reset the PCA9557 in the event of a time-out by asserting a LOW in the reset input. The power-on reset puts the registers in their default state and initializes the I²C-bus/SMBus state machine. The RESET pin causes the same reset/initialization to occur without de-powering the part.

Packaging: TAP
Supplier Type: Authorized Distributor
72
available
QtyPrice
11.70828

Add to cart

TJA1040T/CM,118

TJA1040T/CM,118

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 1MBd Standby 5V Automotive AEC-Q100 8-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
127,500
available
QtyPrice
2,5001.54518
5,0001.50402

Add to cart

UJA1078ATW/5V0/WDJ

UJA1078ATW/5V0/WDJ

Category: Integrated CircuitsInterface ICsSpecialized Interface ICNXP
NXP System Basis Chip Automotive AEC-Q100 32-Pin HTSSOP EP T/R

Packaging: N/A
Supplier Type: Authorized Distributor
2,000
available
QtyPrice
110.22672
108.71472
258.54462
1007.35364
2506.90928
5006.14376
1,0005.19764

Add to cart

TJA1042T/3/1J

TJA1042T/3/1J

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Standby 5V Automotive AEC-Q100 8-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
2,490
available
QtyPrice
12.67106
102.38294
252.17854
1001.83302
2501.77786
5001.4924
1,0001.05546

Add to cart

TJA1042T/3,118

TJA1042T/3,118

Category: CAN Interfaces, CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN Transceiver, I2C, 1 TX, 1 RX, 4.5 V to 5.5 V, 8 Pins, SOIC TJA1042T/3,118 is a high-speed CAN transceiver with standby mode. The TJA1042 high-speed CAN transceiver that provides an interface between a CAN protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing the differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The TJA1042 belongs to the third generation of high-speed CAN transceiver, offering significant improvements over first- and second-generation devices such as the TJA1040. It offers improved Electromagnetic Compatibility (EMC) and Electrostatic Discharge (ESD) performance, and also features ideal passive behaviour to the CAN bus when the supply voltage is off, A very low-current Standby mode with bus wake-up capability, variants with a VIO pin can be interfaced directly with microcontrollers with supply voltages from 3.3V to 5V.

Packaging: TR
Supplier Type: Authorized Distributor
17,500
available
QtyPrice
2,5001.448972
5,0001.424822
10,0001.400812
20,0001.376662
40,0001.352568

Add to cart

TJA1042T/3/CM,118

TJA1042T/3/CM,118

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Standby 5V Automotive AEC-Q100 8-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
7,500
available
QtyPrice
12.34066
102.17154
252.08418
1001.84156
2501.77016
5001.56338
1,0001.29892
3,0001.28324
6,0001.26756

Add to cart

TJA1057T,118

TJA1057T,118

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP The TJA1057 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing the differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The TJA1057 offers a feature set optimized for 12 V automotive applications, with significant improvements over NXP's first- and second-generation CAN transceivers, such as the TJA1050, and excellent ElectroMagnetic Compatibility (EMC) performance. The TJA1057 also displays ideal passive behavior to the CAN bus when the supply voltage is off. These features make the TJA1057 an excellent choice for HS-CAN networks that only require basic CAN functionality. The TJA1057 implements the CAN physical layer as defined in the current ISO11898-2:2003 standard. The TJA1057T is specified for data rates up to 1 Mbit/s. Pending the release of the updated version of ISO11898-2 including CAN FD, additional timing parameters defining loop delay symmetry are specified for the TJA1057GT. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s.

Packaging: TR
Supplier Type: Authorized Distributor
37,500
available
QtyPrice
2,5000.76916
5,0000.75278
10,0000.73626
15,0000.71974
20,0000.70322
25,0000.68684
250,0000.67032

Add to cart

TJA1057T/1Z

TJA1057T/1Z

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Normal/Silent 5V Automotive AEC-Q100 8-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
2,500
available
QtyPrice
311.84156
501.56702
1001.34344
2001.2726
5001.1907
1,0001.11776
2,5001.0248

Add to cart

TJA1051T/3/1J

TJA1051T/3/1J

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Normal/Silent 5V Automotive AEC-Q100 8-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
5,000
available
QtyPrice
12.3212
102.12632
251.87684
1001.68266
2501.51564
5001.3972
1,0000.99624
3,0000.94458

Add to cart

TJA1051T/3,118

TJA1051T/3,118

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP The TJA1051 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The TJA1051 belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices such as the TJA1050. It offers improved ElectroMagnetic Compatibility (EMC) and ElectroStatic Discharge (ESD) performance, and also features: The TJA1051 implements the CAN physical layer as defined in the current ISO11898 standard (ISO11898-2:2003). Pending the release of the updated version of ISO11898-2 including CAN FD, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s. These features make the TJA1051 an excellent choice for all types of HS-CAN networks, in nodes that do not require a standby mode with wake-up capability via the bus.

Packaging: TR
Supplier Type: Authorized Distributor
52,500
available
QtyPrice
2,5001.1501
5,0001.12546
10,0001.10082
15,0001.07618
20,0001.05154
25,0001.0269
250,0001.00226

Add to cart

TJA1021T/20/CM,118

TJA1021T/20/CM,118

Category: Integrated CircuitsInterface ICsLIN TransceiverNXP
NXP LIN Transceivers LIN 2.1/SAE J2602/ISO17987 transceiver

Packaging: N/A
Supplier Type: Authorized Distributor
7,361
available
QtyPrice
11.6464
101.274
251.2054
1001.13092
2501.10152
5001.09368
1,0001.03488
2,5001.0094

Add to cart

TJA1051T/3/CM,118

TJA1051T/3/CM,118

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Normal/Silent 5V Automotive AEC-Q100 8-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
2,475
available
QtyPrice
12.40604
102.17028
252.14774
1001.73656
2501.7192
5001.5645
1,0001.05994

Add to cart

TJA1051T/3/2Z

TJA1051T/3/2Z

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Normal/Silent 5V 8-Pin SO T/R Automotive AEC-Q100

Packaging: N/A
Supplier Type: Authorized Distributor
2,500
available
QtyPrice
2,5000.98644
5,0000.97454
12,5000.94598

Add to cart

TJA1043TKY

TJA1043TKY

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Normal/Sleep/Standby 5V Automotive AEC-Q100 14-Pin HVSON EP T/R

Packaging: N/A
Supplier Type: Authorized Distributor
6,000
available
QtyPrice
6,0001.72802
12,0001.69386

Add to cart

TJA1043T/1J

TJA1043T/1J

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP CAN 5Mbps Normal/Sleep/Standby 5V Automotive AEC-Q100 14-Pin SO T/R

Packaging: N/A
Supplier Type: Authorized Distributor
4,563
available
QtyPrice
12.8371
102.5256
252.45644
1002.21634
2502.08852
5001.85626
1,0001.72102
3,0001.58578

Add to cart

TJA1043TK/1Y

TJA1043TK/1Y

Category: CAN Transceiver, Integrated CircuitsInterface ICsNXP
NXP The TJA1043 high-speed CAN transceiver provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The TJA1043 belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices such as the TJA1041A. It offers improved ElectroMagnetic Compatibility (EMC) and ElectroMagnetic Discharge (ESD) performance, very low power consumption, and passive behavior when the supply voltage is turned off. Advanced features include: The TJA1043 implements the CAN physical layer as defined in the current ISO11898 standard (ISO11898-2:2003, ISO11898-5:2007). Pending the release of the updated version of ISO11898-2 including CAN FD, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s. These features make the TJA1043 the ideal choice for high speed CAN networks containing nodes that need to be available all times, even when the internal VIO and VCC supplies are switched off.

Packaging: TAP
Supplier Type: Authorized Distributor
10,000
available
QtyPrice
13.57616
503.22896
1002.58664
2502.4304
5002.11792

Add to cart

Loading...