AR0132AT6C00XPEA0-DRBR
Category: Electromechanical , Image Sensors onsemi
onsemi ON Semiconductor's AR0132AT 1/3-inch CMOS digital image sensor with an active-pixel array of 1280H x 960V. It captures images in either linear or high dynamic range modes, with a rolling-shutter readout. It includes sophisticated camera functions such as auto exposure control, windowing, and both video and single frame modes. It is designed for both low light and high dynamic range scene performance. It is programmable through a simple two-wire serial interface. The AR0132AT produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including surveillance and HD video. This sensor is compatible with ON Semiconductor's automotive image co-processors which provides megapixel HDR image processing. Packaging: TRYSupplier Type: Authorized Distributor35,527 Qty Price 40 23.0134 50 22.3914 90 21.7694 200 21.1475 400 20.5255 2,000 19.9035 4,000 19.2815
Log in to Buy
AR0132AT6C00XPEA0-DRBR quantity
This product is already in your quote request list.
LM35DT/NOPB
Category: Electromechanical , Temperature and Humidity Sensors Texas Instruments
Texas Instruments Temp Sensor Analog Serial (2-Wire) 3-Pin(3+Tab) TO-220 Tube Packaging: N/ASupplier Type: Authorized Distributor3,049
Log in to Buy
LM35DT/NOPB quantity
This product is already in your quote request list.
MCP9700T-E/TT
Category: Electromechanical , Temperature , Temperature and Humidity Sensors , Temperature Sensors Microchip
Microchip The MCP9700 sensors with Linear Active Thermistor™ Integrated Circuit (IC) comprise a family of analog temperature sensors that convert temperature to analog voltage.The low-cost, low-power sensors feature an accuracy of ±4°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors, e.g., thermistors, the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The Voltage Output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700 temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively. The MCP9700 output 0.1°C/bit for a 12- bit ADC with 4.096V reference.The MCP9700 provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides printed circuit board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for the stability of sensor output. Packaging: TAPSupplier Type: Authorized Distributor5,439 Qty Price 1 0.3794 25 0.3546 50 0.3286
Log in to Buy
MCP9700T-E/TT quantity
This product is already in your quote request list.
