|
|
VN5050JTR-E
Category: Current Limit Switches, Electromechanical, Gate Drivers, Motor DriversSTMicroelectronics |
STMicroelectronics | The VN5050J-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open load condition both in on and off state, when STAT_DIS is left open or driven low. Output shorted to VCC is detected in the off state.When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention.Thermal shutdown with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
Packaging: TR
Supplier Type: Authorized Distributor | 2,500
available | | | Qty | Price |
|---|
| 2,500 | 1.5718 | | 5,000 | 1.5394 | | 10,000 | 1.507 |
|
Log in to Buy
This product is already in your quote request list.
|
|
|
NCP81155MNTXG
Category: Gate Driversonsemi |
onsemi | N/A
Packaging: TR
Supplier Type: Authorized Distributor | 3,000
available | | | Qty | Price |
|---|
| 3,000 | 0.2511 | | 6,000 | 0.2444 | | 12,000 | 0.2377 | | 18,000 | 0.231 | | 24,000 | 0.2243 |
|
Log in to Buy
This product is already in your quote request list.
|
|
|
HIP4082IBZT
Category: Gate Drivers, No CategoryRenesas Electronics |
Renesas Electronics | The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. It has a flexible input protocol for= driving every possible switch combination except those which would cause a shoot-through condition. The HIP4082’s reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5 µs) making it ideal for switching frequencies up to 200kHz. The HIP4082 does not contain an internal charge pump, but does incorporate non-latching level-shift translation control of the upper drive circuits.
Packaging: TAP
Supplier Type: Authorized Distributor | 1,515
available | | | Qty | Price |
|---|
| 1 | 5.5304 | | 10 | 4.9724 | | 25 | 4.7616 | | 50 | 4.5384 | | 100 | 4.3276 |
|
Log in to Buy
This product is already in your quote request list.
|
