|
|
TJA1043TK/1Y
Category: CAN Interfaces, CAN Transceivers, Controller Area NetworkNXP |
NXP | The TJA1043 high-speed CAN transceiver provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The TJA1043 belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices such as the TJA1041A. It offers improved ElectroMagnetic Compatibility (EMC) and ElectroMagnetic Discharge (ESD) performance, very low power consumption, and passive behavior when the supply voltage is turned off. Advanced features include: The TJA1043 implements the CAN physical layer as defined in the current ISO11898 standard (ISO11898-2:2003, ISO11898-5:2007). Pending the release of the updated version of ISO11898-2 including CAN FD, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s. These features make the TJA1043 the ideal choice for high speed CAN networks containing nodes that need to be available all times, even when the internal VIO and VCC supplies are switched off.
Packaging: TAP
Supplier Type: Partner Stock | 10,000
in stock | | | Qty | Price |
|---|
| 1 | 2.5544 | | 50 | 2.3064 | | 100 | 1.8476 | | 250 | 1.736 | | 500 | 1.5128 |
|
Add to cart
This product is already in your quote request list.
|
|
|
MCP2551T-I/SN
Category: Can, CAN Interfaces, CAN Transceivers, Controller Area NetworkMicrochip |
Microchip | The MCP2551 is a high-speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output). It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources (EMI, ESD, electrical transients, etc.).
Packaging: TAP
Supplier Type: Partner Stock | 11,254
in stock | | |
Add to cart
This product is already in your quote request list.
|
|
|
TJA1051T/3/CM,118
Category: CAN Transceivers, Controller Area NetworkNXP Semiconductors |
NXP Semiconductors | CAN 5Mbps Normal/Silent 5V Automotive AEC-Q100 8-Pin SO T/R
Packaging: N/A
Supplier Type: Partner Stock | 2,475
in stock | | | Qty | Price |
|---|
| 1 | 1.7186 | | 10 | 1.5502 | | 25 | 1.5341 | | 100 | 1.2404 | | 250 | 1.228 | | 500 | 1.1175 | | 1,000 | 0.7571 |
|
Add to cart
This product is already in your quote request list.
|
