Electromechanical

Craft your creation, seamlessly. Our one-stop-shop offers a vast selection of electromechanical components from leading manufacturers like Omron, TE Connectivity, and Crouzet. From switches and relays to acoustics and sensors, find everything you need to bridge the gap between the electrical and mechanical worlds in your project. Stop hunting for parts – build what you envision, all here!

  • Clear All

Showing 1–20 of 30 results

Select Product Manufacturer Description Availability Datasheet Web Price Quantity

VNLD5300TR-E

Category: Current Limit Switches, Electromechanical, Motor DriversSTMicroelectronics
STMicroelectronics VNLD5300 Series Dual 300 mOhm Surface Mount Low Side Driver - SOIC-8

Packaging: REEL
Supplier Type: Partner Stock
Log in to view
QtyPrice
2,500Log in to view

Log in to Buy

BTS5215LAUMA1

Category: Current Limit Switches, Electromechanical, Power Load Distribution SwitchesInfineon
Infineon High side power switch with integrated vertical power FET, providing embedded protection and diagnostic functions.

Packaging: TR
Supplier Type: Partner Stock
Log in to view
QtyPrice
1,000Log in to view

Log in to Buy

DS18B20U+T&R

Category: Electromechanical, Temperature and Humidity SensorsAnalog Devices, Inc.
Analog Devices, Inc. Temp Sensor Digital Serial (1-Wire) 8-Pin uMAX T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
3,000Log in to view
6,000Log in to view
15,000Log in to view
24,000Log in to view
30,000Log in to view

Log in to Buy

AR0237IRSH12SHRA0-DR

Category: Electromechanical, Image Sensorsonsemi
onsemi N/A

Packaging: TRY
Supplier Type: Partner Stock
Log in to view
QtyPrice
119Log in to view
130Log in to view
240Log in to view
600Log in to view
1,200Log in to view
6,000Log in to view
12,000Log in to view

Log in to Buy

BTS5210LAUMA1

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 2-IN 2-OUT -10V to 16V 2.4A Automotive AEC-Q100 12-Pin DSO T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
1,000Log in to view
2,000Log in to view
5,000Log in to view

Log in to Buy

AR1335CSSC11SMKA0-CP

Category: Electromechanical, Image Sensorsonsemi
onsemi N/A

Packaging: TRY
Supplier Type: Partner Stock
Log in to view
QtyPrice
69Log in to view
80Log in to view
140Log in to view
350Log in to view
690Log in to view
3,500Log in to view
6,900Log in to view

Log in to Buy

AR0132AT6C00XPEA0-DRBR

Category: Electromechanical, Image Sensorsonsemi
onsemi ON Semiconductor's AR0132AT 1/3-inch CMOS digital image sensor with an active-pixel array of 1280H x 960V. It captures images in either linear or high dynamic range modes, with a rolling-shutter readout. It includes sophisticated camera functions such as auto exposure control, windowing, and both video and single frame modes. It is designed for both low light and high dynamic range scene performance. It is programmable through a simple two-wire serial interface. The AR0132AT produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including surveillance and HD video. This sensor is compatible with ON Semiconductor's automotive image co-processors which provides megapixel HDR image processing.

Packaging: TRY
Supplier Type: Partner Stock
Log in to view
QtyPrice
40Log in to view
50Log in to view
90Log in to view
200Log in to view
400Log in to view
2,000Log in to view
4,000Log in to view

Log in to Buy

BSP742RXUMA1

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 1-IN 1-OUT 5V to 34V 0.4A Automotive AEC-Q100 8-Pin DSO T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
2,500Log in to view
5,000Log in to view

Log in to Buy

AP0101AT2L00XPGA0-DR

Category: Electromechanical, Image Sensorsonsemi
onsemi AP0101AT is a dedicated automotive image co-processor that enables flexible camera platforms using high performance ON Semiconductor megapixel high dynamic range (HDR) sensors. The two-chip solution of sensor and co-processor allows for multiple camera price and performance points with re-use of circuit board design, fast time to market and design flexibility. Sensor performance is enhanced by the reduction in heat resulting from a separate co-processor chip while at the same time enabling high performance features. The AP0101AT is ideal for Automotive Digital Surround View Systems. It works with ON Semiconductor's AR0132AT HDR automotive sensor.

Packaging: TRY
Supplier Type: Partner Stock
Log in to view
QtyPrice
125Log in to view
130Log in to view
260Log in to view
630Log in to view
1,300Log in to view
6,300Log in to view
13,000Log in to view

Log in to Buy

BTS3410GXUMA1

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 2-IN 2-OUT to 1.65A Automotive AEC-Q100 8-Pin DSO T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
2,500Log in to view
5,000Log in to view
12,500Log in to view

Log in to Buy

MCP9700T-E/TT

Category: Electromechanical, Temperature, Temperature and Humidity Sensors, Temperature SensorsMicrochip
Microchip The MCP9700 sensors with Linear Active Thermistor™ Integrated Circuit (IC) comprise a family of analog temperature sensors that convert temperature to analog voltage.The low-cost, low-power sensors feature an accuracy of ±4°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors, e.g., thermistors, the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The Voltage Output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700 temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively. The MCP9700 output 0.1°C/bit for a 12- bit ADC with 4.096V reference.The MCP9700 provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides printed circuit board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for the stability of sensor output.

Packaging: TAP
Supplier Type: Partner Stock
Log in to view
QtyPrice
1Log in to view
25Log in to view
50Log in to view

Log in to Buy

BTS3011TEATMA1

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 1-IN 1-OUT -0.3V to 5.5V 10A Automotive AEC-Q100 5-Pin(4+Tab) TO-252 T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
1Log in to view
10Log in to view
25Log in to view
100Log in to view
250Log in to view
500Log in to view
1,000Log in to view
3,000Log in to view

Log in to Buy

VN7050ASTR

Category: Current Limit Switches, Electromechanical, Power SwitchesSTMicroelectronics
STMicroelectronics SO 08 STRIP SINGLE ISLAND 4+3+1

Packaging: REEL
Supplier Type: Partner Stock
Log in to view
QtyPrice
2,500Log in to view

Log in to Buy

BTS4141N

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 1-IN 1-OUT 12V to 45V 0.7A 4-Pin(3+Tab) SOT-223 Automotive AEC-Q100

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
48Log in to view
50Log in to view
100Log in to view
250Log in to view
500Log in to view
1,000Log in to view
2,500Log in to view

Log in to Buy

BTS4140N

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 1-IN 1-OUT 4.9V to 60V 0.2A Automotive AEC-Q100 4-Pin(3+Tab) SOT-223 T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
79Log in to view
100Log in to view
250Log in to view
500Log in to view
1,000Log in to view
2,500Log in to view

Log in to Buy

LM35DT/NOPB

Category: Electromechanical, Temperature and Humidity SensorsTexas Instruments
Texas Instruments Temp Sensor Analog Serial (2-Wire) 3-Pin(3+Tab) TO-220 Tube

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
1Log in to view

Log in to Buy

BTS3125EJXUMA1

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 1-IN 1-OUT -0.3V to 5.5V 14A Automotive AEC-Q100 8-Pin TDSO EP T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
25Log in to view
50Log in to view
100Log in to view
200Log in to view
500Log in to view
1,000Log in to view
3,000Log in to view

Log in to Buy

MCP9700AT-E/TT

Category: Electromechanical, Temperature, Temperature and Humidity Sensors, Temperature SensorsMicrochip
Microchip The MCP9700A family of Linear Active Thermistor™ Integrated Circuit (IC) is an analog temperature sensor that converts temperature to analog voltage. It's a low-cost, low-power sensor with an accuracy of ±2°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors (such as thermistors), the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The voltage output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700A temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively.The MCP9700A provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides Printed Circuit Board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for sensor output stability.

Packaging: TAP
Supplier Type: Partner Stock
Log in to view
QtyPrice
1Log in to view
25Log in to view
50Log in to view

Log in to Buy

BTS6143D

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 1-IN 1-OUT 5.5V to 38V 41A Automotive AEC-Q100 5-Pin(4+Tab) TO-252 T/R

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
34Log in to view
50Log in to view
100Log in to view
250Log in to view
500Log in to view
1,000Log in to view
2,500Log in to view

Log in to Buy

BTS3410G

Category: Current Limit Switches, ElectromechanicalInfineon Technologies
Infineon Technologies Current Limit SW 2-IN 2-OUT to 1.65A 8-Pin DSO Automotive AEC-Q100

Packaging: N/A
Supplier Type: Partner Stock
Log in to view
QtyPrice
58Log in to view
100Log in to view
250Log in to view
500Log in to view
1,000Log in to view
2,500Log in to view

Log in to Buy

Loading...