|
|
AP0101AT2L00XPGA0-DR
Category: Image Sensor, Sensors › Sensors & IoTonsemi |
onsemi | AP0101AT is a dedicated automotive image co-processor that enables flexible camera platforms using high performance ON Semiconductor megapixel high dynamic range (HDR) sensors. The two-chip solution of sensor and co-processor allows for multiple camera price and performance points with re-use of circuit board design, fast time to market and design flexibility. Sensor performance is enhanced by the reduction in heat resulting from a separate co-processor chip while at the same time enabling high performance features. The AP0101AT is ideal for Automotive Digital Surround View Systems. It works with ON Semiconductor's AR0132AT HDR automotive sensor.
Packaging: TRY
Supplier Type: Authorized Distributor | 11,324
available | | | Qty | Price |
|---|
| 125 | 7.3408 | | 130 | 7.1424 | | 260 | 6.944 | | 630 | 6.7456 | | 1,300 | 6.5472 | | 6,300 | 6.3488 | | 13,000 | 6.1504 |
|
Add to cart
This product is already in your quote request list.
|
|
|
BMA456
Category: Accelerometer, Sensors › Sensors & IoTBosch |
Bosch | ACCEL 2-16G I2C/SPI 12LGA Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 5.06Hz ~ 684Hz 12-LGA (2x2)
Packaging: Cut Tape (CT)
Supplier Type: Authorized Distributor | 15,149
available | | | Qty | Price |
|---|
| 1 | 3.2116 | | 10 | 2.62136 | | 25 | 2.127344 | | 50 | 1.978792 | | 100 | 1.87984 | | 500 | 1.5830336 | | 1,000 | 1.484094 | | 5,000 | 1.3851544 |
|
Add to cart
This product is already in your quote request list.
|
|
|
MCP9700T-E/TT
Category: Sensors › Sensors & IoT › Temperature SensorMicrochip |
Microchip | The MCP9700 sensors with Linear Active Thermistor™ Integrated Circuit (IC) comprise a family of analog temperature sensors that convert temperature to analog voltage.The low-cost, low-power sensors feature an accuracy of ±4°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors, e.g., thermistors, the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The Voltage Output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700 temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively. The MCP9700 output 0.1°C/bit for a 12- bit ADC with 4.096V reference.The MCP9700 provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides printed circuit board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for the stability of sensor output.
Packaging: TAP
Supplier Type: Authorized Distributor | 5,439
available | | | Qty | Price |
|---|
| 1 | 0.3794 | | 25 | 0.3546 | | 50 | 0.3286 |
|
Add to cart
This product is already in your quote request list.
|
