NCP15WF104F03RC
Category: NTC Thermistor , Sensors › Sensors & IoT Murata
Murata THERM NTC 100KOHM 4250K 0402 NTC Thermistor 100k 0402 (1005 Metric) Packaging: Cut Tape (CT)Supplier Type: Authorized Distributor4,067,763 Qty Price 1 0.20832 10 0.178808 25 0.1576288 50 0.1479072 100 0.1260336 500 0.10419472 1,000 0.08721664 5,000 0.07752976
Add to cart
This product is already in your quote request list.
MCP9700AT-E/TT
Category: Sensors › Sensors & IoT › Temperature Sensor Microchip
Microchip The MCP9700A family of Linear Active Thermistor™ Integrated Circuit (IC) is an analog temperature sensor that converts temperature to analog voltage. It's a low-cost, low-power sensor with an accuracy of ±2°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors (such as thermistors), the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The voltage output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700A temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively.The MCP9700A provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides Printed Circuit Board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for sensor output stability. Packaging: TAPSupplier Type: Authorized Distributor2,835 Qty Price 1 0.63714 25 0.54852 50 0.53116
Add to cart
This product is already in your quote request list.
LIS3DHTR
Category: Accelerometer , Sensors › Sensors & IoT STMicroelectronics
STMicroelectronics LIS3DHTR is a MEMS digital output motion sensor, ultra-low-power high-performance 3-axis nano accelerometer. This accelerometer belonging to the “nano” family, with digital I2C/SPI serial interface standard output. The device features ultra-low-power operational modes that allow advanced power saving and smart embedded functions. The self-test capability allows the user to check the functioning of the sensor in the final application. The device may be configured to generate interrupt signals using two independent inertial wake-up/free-fall events as well as by the position of the device itself. Thresholds and timing of interrupt generators are programmable by the end user on the fly. Typical applications are motion activated functions, free-fall detection, click/double-click recognition, intelligent power saving for handheld devices, pedometers, display orientation, gaming and virtual reality input devices, impact recognition and logging, vibration monitoring and compensation. Packaging: TRSupplier Type: Authorized Distributor40,000 Qty Price 4,000 1.63352 8,000 1.59978 16,000 1.56618
Add to cart
This product is already in your quote request list.
